[+34] 982 20 99 20
Oscilloscopes
Oscilloscope WaveRider 100
- The handheld oscilloscope WaveRider 100 is an all-purpose instrument that combines the functions of a traditional oscilloscope, a multimeter, and a wave recorder.
- The WaveRider 100 oscilloscope will allow you to work without any other measuring equipment in most applications.
- The operation of the oscilloscope is easy and intuitive thanks to the menus that are displayed on the screen.
- It is a multimeter with true effective value, resistance measurements, continuity, and diode tests. It receives its supply through a 10:1 ratio voltage probe for high frequency measurements.
- Weighing only 700 g, it is one of the lightest hand held oscilloscopes on the market; additionally, its rechargeable lithium batteries give it great mobility.
General
- The WaveRider 100 oscilloscope allows the use of a screen cursor for amplitude and time measurements.
- Up to 10 adjustment configurations can be recorded, and they can be recovered at any time.
- It also allows for the recording of up to 6 waveforms which can be used as reference when needed.
- The TRIGGER feature allows for the recording of transient or non-seasonal events.
- The SMOOTHING feature eliminates noise.
- Back flap: use of the oscilloscope on a table or on floor.
Oscilloscope WaveRider 100
Features
| Screen | |
| Type: | LCD monochrome |
| Size | 60×80 mm (4") |
| Resolution: | 320×240 pixels |
| Contrast: | adjustable |
| Feedback: | yes |
| Oscilloscope features | |
| Configuration memories: | 10 |
| Reference waveforms: | 6 |
| Able to invert polarity: | yes, for each channel |
| Measurement with cursors: | yes, time and voltage |
| Noise eliminating feature: | yes |
| Especifications: | |
| Band width: | 20 MHz |
| Maximum sampling speed in real time: | 100 Msa/s |
| Equivalent sampling speed: | 100 Msa/s |
| Channels and digitalizers: | 2 |
| Time base range: | 10 ns/div ~ 5 s/div |
| Graphic presicion in times: | ≤±(0.01% + 1 pixel) |
| Voltage range: | 5 mV/div ~ 20 V/div |
| Graphic precision in voltage: | ≤±(5% + 1 pixel) |
| Event recording: | |
| Types of triggers: | Automatic, simple, and normal |
| Trigger flank: | positive or negative |
| Trigger sensitivity: | ½ cuadrant |
| Registry longitude: | 1 kB per channel |
| Surge recording: | 17.5 ns (typical) |
| Input impedance: | 1 MΩ ± 2%//20 pF |
| Attenuation coefficient with probe: | 1×, 10× |
| Maximum input voltage: | 300 V (surge value with 10x probe) |
| Time delay in the channels: | ≤ 300 ps |
| Channel insulation: | 100:1 |
| Two-channel multimeter: | Voltage, period, surge-surge voltage, frequency, effective value |
| Voltage probe | |
| Options: | 1× |
| Input impedance: | 1 MΩ ± 2%// 85pF~115 pF |
| Band width: | DC~5MHz |
| Input voltage: | <150 V DC |
| Compensation range: | --- |
| Environmental specifications | |
| Operating temperature: | 0ºC~+40ºC |
| Storage temperature: | -20ºC~+60ºC |
| Refrigeration: | natural convection |
| Humidity | Under +40ºC: ≤ 90% relative humidity |
| From +40ºC to +50ºC: ≤ 60% relative humidity | |
| Operating altitude: | ≤3.000 m |
| Storage altitude: | ≤15.000 m |
| Dimension information | |
| Size | 222×114×50 mm (length×width×height) |
| Weight | 0.7 kg (with packaging <1 kg) |
| Included accessories | |
| Lithium batteries (installed) | |
| AC/DC adaptor | |
| Voltage probes (1 pair) | |
| Test cables for the multimeter feature (1 pair, red and black) | |
| User manual | |
Screen of the oscilloscope prepared for measuring with cursor
Note 1: except as otherwise noted, the specifications are for the WaveRider 100 with the 10×1 probe
Note2: all specifications are guaranteed except where it says typical
