info@amperis.com (+34) 982 20 99 20
The most advanced technology for battery formation, conditioning, test and desulphation.
The MMF is a universal battery charger, digitally controlled and programmable.
It can operate with batteries of any type, from individual cells to complete packs, and it can be programmed to support applications of any type (Formation, Conditioning, Recovery, Desulphation and Regeneration).
It is based on a new hybrid power conversion technology, featuring an unprecedented combination of very high efficiency, unity power factor (PFC), universal capabilities and precise charge control.
The two parts that are combined together to compose this "Hybrid" system are:
The MMF features a very complete set of charging curves, and the user can complete it by programming new ones, following a very simple procedure.
Thanks to the ultra-filtered output current, this charger ensures a minimal temperature rise in the battery during the recharge process. Moreover, the MMF is suitable to charge battery types that require perfectly constant current and virtually zero ripple.
The MMF is equipped with alphanumeric display & keyboard, Charge History Logger, Programmable Real-Time Clock and Calendar, Audible Alarm and Connectivity package, compatible with wireless Battery Identification Modules and the WEB based Fleet Management System DoctorFleet.com.
Models |
AMPERIS Battery Charger MMF |
AC INPUT |
|
TYPE |
Battery Charger MMF |
STANDARD VOLTAGES |
Single-phase 220-230-240 VAC ± 10% |
EFFIENCY |
>90% (*) |
POWER FACTOR |
> 0,90 (*) |
DC OUTPUT |
|
STANDARD VOLTAGES |
From single battery cell to 600 VDC. |
CURRENT RATINGS |
From 50A to 300A. |
CHARGING CURVE |
User configurable. |
PROTECTION |
|
WRONG BATTERY AND REVERSE POLARITY |
If the battery voltage is outside the acceptable limits, or the polarity is reversed, the charger remains in stand-by mode and gives error/warning message. |
ELECTRONIC OVERLOAD PROTECTION |
Complete protection in case of output short circuit or overload. |
ANTI-ARCING |
WITHOUT AUXILIARY WIRES: When the battery is connected, no arcing is generated at the connectors. If the battery is disconnected while it's being charged, arcing is possible, so it's necessary to turn off the charger before to disconnect the battery. WITH AUXILIARY WIRES (RECOMMENDED): Full Anti-arcing protection in case of battery disconnection, even while the charge is in progress. |
POWER-ON SELF-TEST |
Every time the unit is powered, an automatic self-test of the power electronics and the control boards is executed in less than 10 seconds. In case of fault, the unit remains in safe stand-by mode and gives fault messages. |
AUTOMATIC SHUTDOWN ON BATTERY DISCONNECTION |
If the battery is disconnected while the charge is in progress, the charger turns-off automatically within 3 seconds and a specific message is saved in the Charge History Log. |
SAFETY TIMER |
An independent safety timer turns the charger off in case of malfunction of the main control unit. |
MECHANICAL AND ENVIROMENTAL |
|
DIMENSIONS |
Cabinet A: 500 x 900 x 440 (mm) |
ENCLOSURE |
Steel |
COOLING |
FORCED VENTILATION with active fan control |
AUDIBLE NOISE |
<65 dBA at 1 meter |
ENVIROMENTAL PROTECTION |
IP21 (Standard) |
AMBIENT TEMPERATURE |
OPERATION: -10 / +50 °C |
ALTITUDE |
<2000m |
USER INTERFACE AND CONNECTIVITY |
|
USER INTERFACE |
Alphanumeric LCD Display, 5x LEDs, membrane keyboard and Audible Alarm |
CONNECTIVITY |
|
STANDARDS |
|
MARKING |
CE |
EMC |
IEC EN 61000-6-2, IEC EN 61000-6-4 |
SAFETY |
IEC EN 50178, IEC EN 62040-1 |
TEST AND PERFORMANCE |
IEC EN 62040-3 |
NORTH AMERICAN STANDARDS |
UL 1564 ``Industrial battery chargers´´ |
NOTES
(*) = Reported Efficiency and Power Factor values are AVERAGE values, measured over the entire charging cycle. Peak Efficiency and Power Factor are higher.
MMF-EUR | |||
3x380V | |||
MODELS | VOLTAGE RANGE | CURRENT RANGE | |
MMF | |||
A-50 | 2-48V | 0-50A | |
A-100 | 2-48V | 0-100A | |
A-150 | 2-48V | 0-150A | |
A-200 | 2-48V | 0-200A | |
A-300 | 2-48V | 0-300A | |
B-50 | 2-80V | 0-50A | |
B-100 | 2-80V | 0-100A | |
B-150 | 2-80V | 0-150A | |
C-50 | 2-96V | 0-50A | |
C-100 | 2-96V | 0-100A | |
C-150 | 2-96V | 0-150A | |
C-200 | 2-96V | 0-200A | |
D-80 | 50-200V | 0-80A | |
E-50 | 50-400V | 0-50A |
ORDERING INFORMATION: AMPERIS BATTERY CHARGERS |
|
MODEL: |
i.e. MMF |
MAINS: |
i.e. 3x220V 60Hz |
NOMINAL BATTERY VOLTAGE: |
i.e. 180V |
MAX Nº CELLS: |
i.e. 90 Cells |
GASSING VOLTAGE PER CELL: |
i.e. 2.4V/ Cell |
MAX VOLTAGE PER CELL: |
i.e. 2.75 V/ Cell |
MAX OUTPUT VOLTAGE: |
i.e. 2.75X90= 250 V |
MAX OUTPUT CURRENT: |
i.e. 160 A@216V (Gassing voltage) |
Do you want to buy high quality Battery chargers?
Inquire for our Battery chargers prices.
Do not hesitate to contact us, call us today by phone (+34) 982 20 99 20. We are happy to help you.